The equipment is sanding
The sanding equipment allows to clear quickly and qualitatively surfaces of the foreign connections worsening appearance and technical properties of materials. Commercially the sanding equipment is used for cleaning of rims and other metal details of foreign products of preprocessing of materials and allows to add it gloss or to create a uniform opaque surface.
All processes of cleaning take place in the special tight camera, and the operator of process visually controls process of cleaning and manually changes or supports the direction of a stream of compressed air with an abrasive. Sanding devices can reuse abrasive particles, working in the cyclic mode and giving sand particles repeatedly to process, previously having cleared them of particles of the oxidized metal, a scum or other type of foreign structures which can be formed on material in the course of its processing.
Sandblasting cameras upon the demand of the customer can be in addition completed with the internal rotating table which will be suitable for work with flat or diskovidny elements.
The operator visually watches cleaning of a surface and manually operates a stream of compressed air with an abrasive. Is in installation apprx. 1 dm3 of an abrasive.
Overall dimensions: 1770 x 750 x 950 mm
Sizes of the working camera: 1000 x 850 x 600 mm
The mass of the processed detail: 100 kg
Lump: 160 kg
Food: -220 V 50 Hz – 500 W
- compressed air of 300 l/min 6 bars
As an abrasive it is possible to use dry sand, glass balls of various fractions, corundum, steel fraction and other corresponding materials depending on requirements to the processed surface. To cleaning of a surface without its damage apply glass balls with a small pressure of air, to a matting and removal of steady pollution – firm abrasives (corundum).
Advantages of this installation:
- Possibility of work in rooms with high requirements to the level of dust content of air, including inhabited and household since air comes out completely cleared installation;
- Application inexpensive dyuz own production with various diameters of openings;
- Possibility of bystry replacement of an abrasive (balls on corundum, etc.);
- Possibility of completing of installations by various additional equipment (a rotary table for convenience of processing of rims etc.);
- Use of high-quality Italian AIGNEP pneumatics with automatic blocking of work when opening a door of the camera.