Sanding cleaning chamber
Processing of surfaces before electroerosive processing, after heat treatment, for removal of products of corrosion, steady pollution, a pridach of dullness to metal, glass and other surfaces.
The sanding camera of cleaning will allow to get rid easily and quickly of any by-products initially of processing of metals by means of burning or electric current. Also by means of a sand stream which is mixed with air it is possible to remove an old paint and varnish covering of any density, pollution which do not give in to cleaning by means of detergents or standard mechanical cleaning procedures.
The uniform stream of abrasive particles provides rather careful removal of any foreign film, at the same time polishing the main, firmer surface. Gives it dullness, or at the choice of stronger influence, glossy gloss.
All clearing manipulations are carried out in the tight camera under control of specially trained worker. Control of force of the given air and its direction is selected manually that guarantees lack of undesirable effects during processing of materials or creation of heterogeneity of external textures of a metal detail.
The sanding camera is rather economic in work: about one cubic decimeter of abrasive material it can be reused, being cleared before it by means of the built-in pulse installation.
Installation consists of the hermetic working camera in which processing of a detail by the operator with use of special gloves is carried out. Processing is carried out by a stream of compressed air with abrasive material. The abrasive works in the closed cycle with the filtrational camera where separates from dust by means of the filter. The filter is regenerated by the return impulses of compressed air, and also the exhaust fan which is selecting the purified air outside. Installation on a photo is supplied with a rotary table for convenience of processing of rims.
Overall dimensions: 1770 x 750 x 950 mm
Sizes of the working camera: 1000 x 850 x 600 mm
The mass of the processed detail: 100 kg
Lump: 160 kg
Food: -220 V 50 Hz – 500 W
- compressed air of 300 l/min 6 bars
As an abrasive it is possible to use dry sand, glass balls of various fractions, corundum, steel fraction and other corresponding materials depending on requirements to the processed surface. To cleaning of a surface without its damage apply glass balls with a small pressure of air, to a matting and removal of steady pollution – firm abrasives (corundum).